|
Four Column High Force Test System |
 |
 |
 |
|
Bi-00-100 free standing 4-column servo hydraulic tension-compression Universal Testing Machines, available in the force range of 500–2000 kN are used
to perform a variety of tests on materials and components These test systems are robust and provide a wider test space than most conventional systems. Standard features  • Fully self-reacting frame
 • 500/1000/1500/2000 kN force rating actuators
 • 100-500mm stroke actuator options
 • Adaptable to wide range of fixtures & grips
 • Spacious T-slotted testing bed
 • Hydraulic lifts and clamps
 • Actuator on top crosshead
 • Electronically servo-controlled variable flow, variable pressure, low noise,
  energy efficient pump
 • 5+ kHz 32-bit digital closed loop control
 • 24-bit data acquisitionÂ
 • User friendly MTL-Windows software with dedicated application software
 • Provision for user programmability
 • Options of high test speeds up to 8 m/s Users:  • Civil engineering
 • Construction engineering
 • Railroad components
 • Bridge component testing Applications  • Tension/compression
 • 0-100 Hz cycling frequency
 • 3-point bend tests on reinforced concrete slabs, re-bar durability and strength,
   fatigue testing of rails  |   |
Specifications | Load frame | |  Model no |  Bi-01-104-4CT |  Bi-01-105-4CT |  Bi-01-106-4CT |  | |  Capacity |  500 kN |  1000 kN |  2000 kN | |  Column space |  800 mm |  800 mm |  1000 mm | |  Total height |  3400 mm |  3400 mm |  3600 mm | |  Max daylight |  2000 mm |  2000 mm |  2200 mm | |  Min daylight |  200 mm |  300 mm |  500 mm | |  No of columns |  4 |  | |  Weight |  5500 kg |  8500 kg |  11000 kg |  | | Actuator | |  Model no |  Bi-02-112 |  Bi-02-113 |  Bi-02-114 |  | |  Capacity |  500 kN |  1000 kN |  2000 kN | |  Stroke |  50/100/150/250 mm | |  Manifold | NG22 ports – 3, Accumulator ports & customer ports | |  Servo valves | 100/360 LPM | |  Weight |  225 kg |  325 kg |  450 kg | | 2350 Basic controller | |  Model no |  Specifications | |  Bi-04-R19 |  19" rack enclosure with 110/220 V a.c. power supply and backplane expansion slots, with USB communication interface designed for
 operation with computer interface only | |  Bi-04-MB-8S |  Motherboard with eight channel servo output - add | |  Bi-04-BP-109 |  Back plane interface card to hydraulics, pneumatics, furnace, LCF and DCPD | |  Bi-04-DSP |  DSP card with USB cable | |  Bi-04-SC-151 |  Digital (AC) single channel (LVDT) signal conditioner compatible with 4 & 5 wire LVDT | |  Bi-04-SC-152 |  Digital (DC) single channel (strain bridge) signal conditioner compatible with 120, 350, 700 & 1000 ohms strain bridge | |  Bi-04-DA-251 |  4 channel digital data acquisition card, PCI interface | |  Bi-04-BW-903 |  Basic software for single actuator | |  Bi-04-FW-901 |  MTL 7 firmware for single actuator | |  Bi-04-EC-801 |  External cable set, includes stroke cable, load cell cable, strain cable, servo cable, hydraulic cable, earth cable, digital signal cables for
 signal conditioners. | | Hydraulic power pack | |  Model No |  Flow rate LPM |  Power required kW |  Weight with oil kg |  Cooling | |  Bi-03-104 |  40 |  22 |  450 |  No cooling required | |  Bi-03-105 |  65 |  30 |  600 |  Water cooled | |  Bi-03-106 |  100 |  45 |  750 |  Water cooled | |  Bi-03-107 |  200 |  120 |  1300 |  Water cooled | |  Bi-03-108 |  400 |  200 |  2500 |  Water cooled | | Load Cell | |  Model No |  Bi-06-512 |  Bi-06-513 |  Bi-06-514 |  | |  Capacity |  500 kN |  1000 kN |  2000 kN | |  Bridge resistance | 350 Ohms | |  Shunt calibration | Internal shunt with logic for auto calibration | |  Linearity | Better than 0.3% of FR |  Note: Dimensions subject to minor variations based on specific ratings.   We rejuvenate obsolete or abandoned systems with state-of-the-art digital controls and user-friendly MS-Windows compatible application software |
|
